Features and Details:

• Material Thickness – 1mm

Features and Details:

• Suitable for Wraparound | Citric | EVO | Blenze Plus. | Horizon | Impact | Midas

Wraparound Data/ Communication Jacks

Honeywell MK offers a considerable range that is upto-date, keeping up with the new emerging technologies and changing lifestyles. There are a whole range of communication jacks for interactive digital voice and data communication services. RJ 11-1 line, RJ 11-2 line, Twin RJ-11, RJ 45 Cat 5e and Cat 6, RJ 45 Cat 6 and Twin RJ-11 compliant to FCC part 68.

• Suitable with both Wraparound and Wraparound Plus Front Plates.

CAT6 RJ 45 Receptor Frame

Module : 1 M

Function : A frame that can house Avaya, Krone, AMP Cat 5e & Cat 6 RJ 45 jacks/ connectors; innovative design enables ease of installation – Jacks can be clip fit into this frame.

RJ 45 Cat 6 Computer Jack

Module : 1 M

Function : To allow termination of incoming data cables in computer networks.

Application: Wide application in computer data networks used in offices, hotels and other applications where data cables have to be terminated.

Electrical Specification: No. of Contacts : 8| Category : Cat 6| Speed of Transmission : 250mhz 100 ohm UTP cable size| Rate of Transmission : 1 Giga bytes per sec.| Compliance to : FCC Part 68| Standards Insulation Resistance : >500 M ohm| Current Rating : 150 VAC, 2A| Dielectric Withstand Voltage: 1000V, 60Hz/1 min| Contact Resistance : <20 milli ohm| DC Resistance : 0.1 ohm

Wraparound Switches

The use of electricity cannot be taken for granted. At home and at work you use it everyday. At the flick of a switch, we all have convenient and easy access to electricity. Switches, plugs and sockets make the vital connection to the electrical supply. Honeywell MK switches are available in 6A, 10A, 16A, 20A & 32A ratings with and without indicators and one way/ two way and bell push types. A/C motor starter switches are also available in 16-25A ratings. All Wraparound switches conform to IS 3854:97.

• Suitable with both Wraparound and Wraparound Plus Front Plates.

2M Bell Push Switch in Wraparound

Module: 2 M

Features:

• • Complies to IS3854
  • LED indicators
  • Extended lens for better visibility of LED

Electrical Specification: Rated Current : 6AX| Rated Voltage : 240V| Terminal Capacity : 1.5 sq mm| Nature of Supply : 50 Hz

Application: To make or break electrical supply to a load.

Features and Details:

• Suitable with both Wraparound and Wraparound Plus Front Plates.

20A Energy Key Switch with Time Delay

Module : 3 M

Function : Serves as master power control for hotel rooms

Features : 30 sec time delay for convenience of the guest; provision on key tag to stick room numbers; insert Key marking with LED indicator

Electrical Specification: Rated Power : 20 A| Rated Voltage : 170 to 250 Volts AC| Nature of Supply : 50 Hz| Load : 3500W (Resistive & Inductive)

Wraparound Switches

The use of electricity cannot be taken for granted. At home and at work you use it everyday. At the flick of a switch, we all have convenient and easy access to electricity. Switches, plugs and sockets make the vital connection to the electrical supply. Honeywell MK switches are available in 6A, 10A, 16A, 20A & 32A ratings with and without indicators and one way/ two way and bell push types. A/C motor starter switches are also available in 16-25A ratings. All Wraparound switches conform to IS 3854:97.

32A DP Switch

Module : 2 M

Application : To ON and OFF loads carrying heavy resistance & inductive loads upto 7.86kw

Features:

• Modular (2M) in design – more flexibility and better aesthetics
• Spate metal box not required; can be used with Wraparound front plate, ensuring easy installation and clean aesthetics.
• Complies to IS 3854:97
• Copper with AgNi Face bi metal rivet for better contacts and prevention of arc.
• Easy installation with top angle screw slot
• LED Indicators.

Electrical Specification: Rated Power : 32A| Input Voltage : 230 V AC| Nature of Supply : 50Hz| Terminal Capacities : 10 sq mm| IP Rating : IP20| Load Specification : 32A at 230V AC 50Hz

10AX Switch

Module : 1 M

Function: To make and break electrical supply to a load

Electrical Specification: Rated Current : 10A Rated Voltage : 230 V Nature of Supply : 50 Hz Terminal Capacities : 1.5 Sq mm wire to be used

6A Switch with Indicator

Module : 1 M

Function : To make and break electrical supply to a load Application : To visually identify and demark UPS powered switch.

Electrical Specification: Rated Current : 6A| Rated Voltage : 230 V| Nature of Supply : 50 Hz| Terminal Capacities : 1.5 Sq mm wire to be used

Wraparound Sockets

Honeywell MK sockets, unlike any other, are the safest because of a unique “”child resistant shutter system””. They are technically designed to inhibit access to electricity, unless all three pins of a standard plug are in position. They are available in 6A, 13A, 16AX and 25A ratings and are designed to the requirements of IS1293:88. 6/16A socket in 2M size has been introduced for optimum space utilisation.

• Suitable with both Wraparound and Wraparound Plus Front Plates.

25A Socket

Module : 3 M

Function : Suitable for use in 25A / 16A 3 pin plugs; suitable for Flush and Surface mounting; can be clipped on to any front plates of 3 M and above.

Electrical Specification: Rated Voltage : 250 V| Rated Current : 25 A| Nature of Supply : AC only| Terminal Capacities : 4 sq mm wire to be used

16A Raised Socket

Module : 2 M

Function : Suitable for use in conjunction with IS compliant 6A and 16A 3 pin plugs.

Electrical Specification: Rated Current : 16A/6A| Rated Voltage : 250 V| Nature of Supply : AC only| Terminal Capacities : 2.5 Sq mm wire to be used

6/16A Socket

Module : 3 M

Function : Suitable for use in conjunction with IS compliant 6A and 16A 3 pin plugs.

Application : To visually identify and demark UPS powered sockets.

Electrical Specification: Rated Current : 16A/6A| Rated Voltage : 250 V| Nature of Supply : AC only| TI: 2.5 Sq mm wire to be used

6-13A International Socket

Module : 3 M

Function : Suitable for use in conjunction with standard plugs of all major countries from 6A upto 13A rating; suitable for Flush and Surface mounting; can be clipped on to any MK front plate of 3M and above

Application : To visually identify and demark UPS powered sockets

Electrical Specification: Rated Current : 6A upto 13A| Nature of Supply : AC only| Rated Voltage : 230 V| Terminal Capacities : 2.5 Sq mm wire to be used

6A Universal Socket

Module : 2 M

Function : Suitable for use in conjunction with IS compliance 6A – 3 pin, 2 pin and 2 pin flat plugs

Application : To visually identify and demark UPS powered sockets

Electrical Specification: Rated Current : 6 Amps| Rated Voltage : 250 V| Nature of Supply : AC only| Terminal Capacities : 1.5 Sq mm wire to be used.

Shaver Socket

Module : 4 M

Function : Compatible with all kinds of shavers; accommodates wide range of 2 pin round and flat pin plugs.

Features : Choice of 230V for 115V output socket; integrated with step down transformer; also provides high degree of isolation from mains; earth terminal provided.

Electrical Specification: Rated Power : 15 VA| Input Voltage : 230 V| Output Voltage : 115 & 230 V| Nature of Supply : AC only| Terminal Capacities : 4 sq mm wire to be used.

Wraparound Support Accessories

A range of accessories is also available – Electronic Chime, a melodious buzzer to draw attention; Lite Kontrol – dimmers for tungsten lamps; Breeze Kontrol – humless fan speed control for loads from 300W to 1000W; Foot Lamp passage way light; TV Coaxial Outlet – for enhanced quality reception of TV signals; and 16A & 25A Mini Trip switches in modular range – 2 M.

• Suitable with both Wraparound and Wraparound Plus Front Plates.

Wraparound 1M Step Fan Step Controller/ Regulator

Module : 1 M

Function : Controls the speed of the fan to four preset speeds.

Application : Ideal to be used for ceiling fans; Best suited for residences and public utility buildings like banks, hospitals, hotels, etc.

Electrical Specification: Rated Power : 100 Watts| Rated Voltage : 240 V| Nature of Supply : AC only| Terminal Capacities : Through flexible leads (95 mm) with connector

Features and Details :

• Both ‘Wraparound’ and ‘Wraparound Plus’ Front Plates are suitable with all Wraparound Switches and Sockets.

6M Wraparound Plus Front Plate

• Module : 6 M
• Function : Suitable to mount on flush & surfaces boxes
• Application : Suitable for use in houses, hotels and other similar installations.
• Features : Rectangular profile, robust design and compatible with most of standard available metal boxes; multi directional flexible alignment in grid covers for shortcomings in box installations.

10M Horizontal Wraparound Front Plate

• Module: 10 M H
• Application: Suitable for houses, hotels, offices, hospitals and similar installations.
• Features: Smooth curvature of the snap-on front plate minimises dust accumulation; blends with all kinds of interiors; snap-on configuration eliminates use of fixing screws, thereby improving aesthetics.

18M Wraparound Plus Front Plate

• Module : 18 M
• Function Suitable to mount on flush and surfaces boxes
• Application : Suitable for use in houses, hotels and other similar installations.
• Features : Rectangular profile, robust designand compatible with most of standard available metal boxes; multi directional flexible alignment in grid covers for shortcomings in box installations.